2021–26 Bronco2- & 4-Door
Mabett Bumper Bull Bar for 2021–2026 Ford Bronco
Low-set steel bull bar for the Bronco, 1.5 inch tubing
- Not for Bronco Sport
1 bar with brackets steel tube and steel plate, black powder coat
You pay at checkout with our retail partner, at the price shown there.
Best for: A powder-coated steel bar for the front bumper
- Sits low
- Steel tubing
- 3mm brackets
Mabett Bumper Bull Bar
$129.99
About the Mabett Bumper Bull Bar
Mounted to the front bumper of your 2021–2026 Bronco, 2-Door or 4-Door, this bar rides lower and closer to the grille than the factory bull bar, so it crowds the front camera less. It suits a Bronco with the factory modular steel bumper, and it does not fit the Bronco Sport. You get 1.5 inch steel tubing with a 1.5mm wall on 3mm steel plate brackets, all in black powder coat. It reuses the original screws and gaskets, needs no drilling, and one person can put it on in about 10 minutes.
In exterior & protection for the Bronco you will find it next to the Mud Flaps, both part of the Mabett range.
Key features
- Sits low: The bar sits lower in front of the grille than the factory bull bar.
- Steel tubing: The tube is 1.5 inches across with a 1.5mm wall.
- 3mm brackets: The mounting brackets are cut from 3mm steel plate.
- Original hardware: It mounts with the factory screws and gaskets, no drilling.
Install and use
- 1
Remove the factory screws at the bumper mounting points.
- 2
Hold the bar in place and line up the brackets.
- 3
Refit the original screws and gaskets and tighten them.
Fitment
| Buy | Buy |
|---|---|
| Vehicle | Ford Bronco |
| Model years | 2021–2026 |
| Body | 2-Door & 4-Door |
| Fit notes | Not for Bronco Sport |
| Exact fit | Ford Bronco 2021–2026, 2-Door and 4-Door |
| Not for | Bronco Sport |
For a Bronco with the factory modular steel bumper whose owner wants a bar that keeps clear of the front camera.
Specifications
| Item | Detail |
|---|---|
| Fit | Ford Bronco 2021–2026, 2-Door and 4-Door |
| Not for | Bronco Sport |
| Tube | 1.5 in diameter, 1.5mm wall, steel |
| Brackets | 3mm steel plate |
| Finish | black powder coat |
| Install | original screws, no drilling, about 10 minutes |
More Mabett parts for your Bronco
-
2021–26 Bronco4-Door
Mabett Door Edge Guards
Door sill guards for the 4-Door Bronco with a 1966 pattern
$38.99 
-
2021–26 Bronco2- & 4-Door
Mabett Mud Flaps
Bronco mud flaps, front pair or full set of four
from $79.99 2 packs
-
2021–26 Bronco2- & 4-Door
Mabett License Plate Bracket
Front plate bracket for the Bronco, two bumper styles
from $32.99 2 options
-
2021–26 Bronco2- & 4-Door
Mabett Crash Bar End Caps
Four rubber plugs for the open ends of the Bronco crash bar
$19.99
-
2021–24 Bronco4-Door
Mabett Window Visor Rain Guards
Window rain guards for the 2021–2024 Bronco 4-Door
$59.99
-
2021–26 Bronco2- & 4-Door
Mabett Side Steps Running Boards
Steel side steps that attach to Bronco factory rock rails
$145.99
-
2021–26 Bronco4-Door
Mabett Front Tube Doors, 2 pcs
Steel front tube doors for the Bronco 4-Door, pair
$239.99
-
2021–26 Bronco2- & 4-Door
Mabett Door Pocket Storage Set
Door storage boxes for the front or rear doors of the Bronco
from $36.99 2 options
-
GuideFloor mats that stay put in a Bronco, Maverick or Tacoma7 min readRead the guide
